Device Technologies Inc  

Seal-Fast™ enclosure seals are metal reinforced in flame & heat resistant Silicone or EPDM for durable dependable performance. 100's of profiles.

Seal-Fast can be customized in two main ways:

DTi can create a profile for your specific needs and test it for performance before production.

DTi can create one-piece seals - made by bonding the ends of an EPDM/Silicone seal into a one-piece finished gasket.

Advantages of One Piece Seals:

1. 360⁰ protection,
2. Faster to apply with no secondary ops like gluing or cutting,
3. Savings: cut total install costs by 29.1% (@ $60 shop rate)
4. Can be made to fit with a slight stretch for a tighter seal without deformation. 
5. Lower failure rates vs. onsite bonding.
6. Lower health & safety issues - no VOCs, glues, solvents or Hazmat. 
7. Allows more automation in assembly.

If you are using glued-in nylon grommets in your production to protect wiring, you should consider the advantages of switching to Spring-Fast. 

Benefits

1. Best in class performance: It is designed to grip without adhesive
2. It is load tested for high vibration, shock, and G force with no known failure in 30+ years.  
3. Efficiency is 9.5x than glued-in grommets: it installs in seconds even with wiring in place.
4. With labor shortages & the need to do more with less, this simple change makes sense.
5. Time is money:  easy, no-glue installation creates savings of at least 49%.
6.  Spring-Fast be removed/reinstalled with no loss in retentive strength.
7. Fewer consumables used in the installation: no glue, cheesecloth, solvents, gloves, etc
8. Less waste: Spring-Fast can be cut to length vs the old 12.75” MS21266 nylon grommets.    
9. Safer worker environment with no VOCs from adhesives or solvents